• New junction box LAD4

• Protection against environmental influence

• RUBFLEX - The special rubber profiles for optoelectronic safety edges.

With this new business area of the Rubflex-products we are going to expand our corporate policy of qualified partnerships also into the field of the EPDM-rubber profiles for safety edges on doors and gates.

With own designing and tool making we develope the ideal rubber profile with optimised characteristics.

The exclusively for us developed rubber mixture means constant high quality of the physical characteristics optimal qualified for our optical safety edge SIGNAL.

We deliver a guaranteed quality product and therefore we developed a new measuring system for the assessment of the optical characteristics.

RUBFLEX innovation in rubber profiles

here you will find out more about: rubber profiles for opto edge

• mounting bracket for RP20 and RP25 reflective photo-electric switch

mounting bracket for RP20 and RP25 reflective photo-electric switch,
specially for sectional doors, weatherproof, extremely robust due to additional beading
here you will find out more about: accessories for RP20 and RP25 reflective photo switches

• Argos through-beam photo-electric switch

The Argos is designed for the direct mounting in profile housings.
Due to the big aperture angle a safe function is assured at all times. With the M25x1.5 design the Argos matches with standard cable gland sizes. The high degree of protection can be obtained when mounted with the provided seal. With the integrated second transmission channel a second light-stretch can be obtained without the two interfering with each other. For a longer life of the sensors an electrical potential-free closing contact is being used which is nonwearing and short-circuit protected. ...
here you will find out more about: Argos through-beam photo-electric switch

• NOCON non contact safety edge

The NOCON is a modular system for easy series assembling respectively converting the standard rubber profile safety edge into a non-contact system. ...
here you will find out more about: NOCON non contact safety edge

• Low-Power-SIGNAL opto edge

The Low-Power-SIGNAL chooses the output frequency automatically according to the respective conditions. For a lower current consumption in battery mode the output frequency will be reduced to 400Hz. This results in more life time for the batteries. The wireless transmitted safety signals will be processed in the control module which then gives out the required output frequency for the door control.
With a direct connection of the Low-Power-SIGNAL to the door control, using the spiral cable, a standard output frequency of typ. 900Hz will be created ....
here you will find out more about: Low-Power-SIGNAL

top

view this page in german