The NOCON is a modular system for easy series assembling respectively converting the standard rubber profile safety edge into a non-contact system.
The non contact safety edge NOCON is the ideal combination of functionality, safety and easy assembling.
The NOCON is suitable for series production but also very easy to use for retrofitting as an alternative for the approach
stopper. No design changes on the door are necessary. The safety light beam runs beneath the door rubber profile and
because of that obstructions will be recognised without contact. Through this faster door closing is possible without
exceeding of permitted closing forces.
The non contact safety edge NOCON includes the innovative SIGNAL-sensors with their integrated diagnostic system. To
realise this, the transmitter has got an all around visible
yellow ring LED. When switched on, the optical values of
the safety edge are measured and indicated with a flash
code of 1...16 impulses.
One impulse is the best value and 16 impulses indicates,
that the limit of the optoelectronic system is reached. After
displaying the diagnostic value the SIGNAL changes to the
normal operation mode. Now the triggering of the safety
edge is displayed by the LED.
| ordering details |
| model |
|
order number |
| NOCON for sectional doors |
| NOCON-T/1m |
transmitter |
315262 (1.114 480-010 sec) |
| NOCON-R/10,5m |
receiver |
315266 (1.114 490-105 sec) |
| NOCON for roller shutters |
| NOCON-T/1m |
transmitter |
315269 (1.114 500-010 roll) |
| NOCON-R/10,5m |
receiver |
315273 (1.114 520-105 roll) |
| Because of the several different models and therefore many article numbers please get all the different models and numbers from the data sheet. |
nocon_non_contact_safety_edge.pdf (451 KB)
top
|