Argos through-beam photo-electric switch, multichannel
-- can now be upgraded to a 4-channel system --

The Argos is designed for the direct mounting in profile housings.

• Large Range
• Dual power supply
• Transmitting channel selectable
• Insensitive against ambient light
• Fully epoxy resin filled
• High degree of protection
• Direct mounting, vandalism protected
• Nonwearing semi-conductor relay
• Soiling indication
• Easy adjustment

Due to the big aperture angle a safe function is assured at all times. With the M25x1.5 design the Argos matches with standard cable gland sizes. The high degree of protection can be obtained when mounted with the provided seal. With the integrated second transmission channel a second light-stretch can be obtained without the two interfering with each other. For a longer life of the sensors an electrical potential-free closing contact is being used which is nonwearing and short-circuit protected.

ordering details
model		order number
Argos-T	Transmitter with 4m cable	315275 (1.114 530 040)
Argos-R	Receiver with 4m cable	315278 (1.114 535 040)

For further technical details please refer to the following datasheet:

Argos_through_beam_photo_switch_2channel.pdf (688 KB)

Argos_through_beam_photo_switch_4channel.pdf (688 KB)

Argos_through_beam_photo_switch_P.pdf (1,41 MB)

top

view this page in german