AOS 6000 safety processing unit, 4 channel

Safety category 3
for up to 4 optoelectronic safety devices
for instance pull-in protection "TwinPro" or safety edge "SIGNAL"
2 safety circuit for 3 safety devices and another circuit for 1 safety device
Signalling contact
LED indicators

The AOS 6000 was developed for processing all common optoelectronic safety edges, our seriess SIgnal and Low-Power-SIGNAL and compatible systems. Additionally this safety control unit can be used to build a catagory 3 pull-in protection with our "TwinPro" System. The AOS 6000 can be combined with many door controls very easily to act as safety device.
The AOS 6230 has got 2 safety circuits to process 4 optoelectronic safety devices according to EN13849-1 PL... A typical example of use would be 3 pull-in protections "TwinPro" on 1 circuit and a safety edge Signal on the other.

Operating voltage:
230 VAC

ordering details
model	op. voltage	order number
AOS 6230	230VAC	315427

For further technical details please refer to the following datasheet:

AOS6230_safety_control_unit_A5.pdf (1,51 MB)

top

view this page in german