Witt Sensoric GmbH Berlin - HOME

safety edges, non contact safety edge nocon, pull-in protections TwinSafe and TwinPro,
reflective photo switches RP20 and RP25, through-beam photo switch, headlight flash controller LITAS, spiral cable,
rubber profiles and accessories - Optoelectronic systems direct from the manufacturer -

optoelectronic safety edge non contact safety edge pull-in protection reflective photo switch through-beam photo switch through beam photo switch
safety control unit headlight flash controller accessories rubber profile NEWS NEWS
AOS1000 safety processing unit

AOS 3000 safety processing unit

  • Safety category 3
  • 1 input for processing an optoeletronic safety edge or "TwinPro" pull-in protection
  • Signalling contact
  • 3 LED indicators

The AOS 3000 was developed for processing all common optoelectronic safety edges, our seriess OS and compatible systems. Additionally this safety control unit can be used to build a catagory 3 pull-in protection with our "TwinPro" System. The AOS 3000 can be combined with many door controls very easily to act as safety device.

Operating voltage:
230 VAC, 24 VDC oder 24VAC (available on request)

ordering details
model op. voltage order number
AOS 3230 230VAC 314756 (1.113 752 )
AOS 3024 24 VDC 314758 (1.113 753 )
AOS 3024 24 VAC 314761 (1.113 758)

For further technical details please refer to the following datasheet:

PDF Logo AOS3230_safety_control_unit_A5.pdf (230 VAC; 1,87 MB)

PDF Logo AOS3024DC_safety _control_unit_A5.pdf (24 VDC; 1,49 MB)

PDF Logo AOS3024AC_safety _control_unit_A5.pdf (24 VAC; 1,49 MB)

PDF Logo AOS_3000_4000_5000_safety_processing_unit_P.pdf (5,98 MB)

page up top

view this page in german this page in german

AOS 3230 safety control unit
AOS4230 safety processing unit
AOS5230 safety processing unit
AOS6230 safety processing unit
AOS124 safety processing unit